• The explosion-proof / flame-proof housing is a NEMA 4X, water-proof rated enclosure designed as an IP66 housing. This housing achieves UL Class I, Div. 1, Groups B, C, D; Class II, Div. 1 & 2, Groups E, F, G; and Class III
• Universally compatible with any industrial door.
• Ability to disregard pedestrians and only detect large masses.
• Can detect traffic moving both towards and away from the door.
• Can be mounted up to 22 ft.
• Available in explosion-proof housing and XL - for extra low mounting.
  
• Energy savings - Bidirectional,
  unidirectional approach and unidirectional depart microwave detection options
• Adjustable detection settings - Six modes
  of detection filtering for pedestrian and parallel traffic rejection
• Rated for harsh environments - P65 rated
  enclosure
• Remote control adjustments - Remote
  control programming enables user to quickly and safely make changes from the
  ground

User Guide / Manual

Cut Sheet

Explosion Proof Comparison

Remote Control User Guide

Architectural Spec Sheet

Industrial Sensors Comparison

How to use the Push Buttons for Falcon

How do I set the FALCON to detect vehicles but not people?

Set Detection filter to “3” or higher, walk-test, and then test with a vehicle.

Why does the FALCON still detect people when I have the Rejection filter set to “6”.

The mounting height may be incorrect. The FALCON mounting height range is 11.5 to 23 feet, the FALCON XL mounting height range is 6.5 to 11.5 feet, and the FALCON WIDE mounting height range is 11.5 to 21 feet.

Why does the FALCON no longer detect fork trucks when I set the Detection filter to not detect people?

The mounting location may be incorrect. The FALCON should be mounted directly in the center, above the door.

How long is the cable for the FALCON?

30 feet.

Why are the wire colors of my new FALCON different from my old FALCON?

The wire color changed from European coloring to US coloring. Verify wiring connectivity in the User’s Guide.

What is the power requirement for the FALCON?

12 to 24 VAC ±10%; 12 to 24 VDC +30%/-10%

Why is the door recycling open?

The FALCON is detecting the motion of the door or sensing external vibrations. Tilt the sensor out farther and/or reduce the detection field (Sensitivity).

If the FALCON is mounted to the door’s header, remount it to the wall with an extension bracket, if needed.

Can I adjust the FALCON without the remote control?

Yes. Reference the User’s Guide for manual adjustments.

Will the FALCON detect an object if it stops moving?

No. The FALCON will only detect objects in motion.

Why is the door randomly opening even with nothing or no one in the area?

The FALCON may be detecting environmental interference such as ceiling fans, blowers, or air curtains.

Universally compatible with any industrial door.