• DEFLECTOMETER®: The front panel 7-segment LED DEFLECTOMETER®
  provides visual feedback and assistance for setting the correct sensitivity,
  reading the frequency of the loop, reporting Loop Faults, and indicating Delay
  & Extension Timing functions.
• Sensitivity Meter: With a typical size vehicle over the
  roadway loop, the DEFLECTOMETER® functions as a Sensitivity Meter. The optimum
  sensitivity setting should provide a reading of “5”. You can adjust the
  DEFLECTOMETER® reading by using the front panel UP or DOWN sensitivity buttons.
  Automatic quantitative feedback of the loop system operation ensures that the
  detector is set to the most optimum sensitivity level to detect ALL vehicles,
  including motorcycles and high-bed vehicles.
• Frequency Meter: Following power-up or reset, the
  DEFLECTOMETER® will indicate a 2 or 3 digit number (quickly flashes) that
  indicates the loop frequency of the loop & loop network. Keeping your loops
  separated by at least 5 KHz avoids crosstalk problems and future service calls.
  
• Ten (10) Levels of Sensitivity: 10 levels of sensitivity (0
  to 9) can be easily set using the UP or DOWN push buttons.
• One Model Covers ALL Low Voltages: LMA-1800 operates on
  12VDC, 24VDC, and 24VAC
• Advanced Loop Diagnostics: The Loop Fault Monitor
  continually checks the integrity of the loops and will report and store 3 types
  of loop faults; Open Loops, Shorted Loops, and 25% sudden changes in
  inductance.
• Loop Fault Memory: The Loop Fault Memory uses internal
  Non-Volatile memory to store and display the current and previous loop faults
  utilizing the front panel “Loop Fault” LED and DEFLECTOMETER®. A power loss or
  reset will not delete this memory. A MUST FOR TROUBLESHOOTING!
• Call Output Memory: The detector will not drop a Call state
  if power is lost for a minimum of 4 seconds or less.
• Two Second Delayed Detection: A 2-second CALL delay time can
  be provided via the program DIP switch.
• Automatic Tuning
• Lightning & Surge Protection
• Four (4) Frequency Levels
• Compatible with ALL radio controls & remote openers
• Sensitivity Boost
• Fail Safe and Fail Secure Configurations
• Separate Color-Coded LED indicators
• Wide Loop Inductance Range: 20 to 2500 micro Henries

Plug Compatible with the following Operators:

• All Linear Operators with APeX controller
  
• Advanced Access Automation/FAAC CSL2000, CSW2000, RSW1000
  
• All-O-Matic SL100-DC
  
• Chamberlain/Elite SL3000, CSW200
  
• Intelligate Systems IQ500, IQ5000
  
• SECOM Late model operators with 10-pin Molex connectors
  
• Rotary Gate Systems SL1000R, SL1000C, SL1000I
  
• TyMetal TYM 1000 , TYM 2000
  
• Viking Access Models L-3, F-1, T-21, H-10, B-12, Q-4

Manual

Loop Install Guide

Loop Guidelines

Loop Size Chart

* All Linear Operators with APeX controller

* Advanced Access Automation/FAAC CSL2000, CSW2000, RSW1000

* All-O-Matic SL100-DC

* Chamberlain/Elite SL3000, CSW200

* Intelligate Systems IQ500, IQ5000

* SECOM Late model operators with 10-pin Molex connectors

* Rotary Gate Systems SL1000R, SL1000C, SL1000I

* TyMetal TYM 1000 , TYM 2000

* Viking Access Models L-3, F-1, T-21, H-10, B-12