Rosslare MD-D02B EXPANSION BOARD FOR 225IP U-B (FOR NEW PANELS)
Rosslare MD-D02B EXPANSION BOARD FOR 225IP U-B (FOR NEW PANELS)
- Current Trade Policy Costs Included In Price
- In Cart Discounts Offered on Many Products
- GSA, Net 30 and purchase orders available
Description
The Rosslare MD-D02B is a 2-reader expansion module for AC-225x-B panels, including the AC-225IP-BU. It plugs into the panel expansion port and is recognized automatically at power-up. The module adds two reader ports, four supervised inputs and four Form C relays rated 5 A.
With the MD-D02B installed, the panel runs 4 readers and 4 doors. Reader ports accept Wiegand or Clock and Data readers and keypads and supply 12 VDC at up to 300 mA. The module draws 30 mA standby and 135 mA max from the panel, not counting readers. Size is 3.9 x 3.0 x 1.3 in.
Before You Order
- For Rosslare AC-225x-B series panels.
- Inputs and outputs are configured in AxTraxNG.
- Readers and locks are separate.
- 2-year limited Rosslare warranty.
- Additional two proximity readers or keypads
- Four relay outputs and four supervised inputs to the access control panel
- Wiegand or Clock-and-Data transmission keypad or biometric reader compatibility
- LED status feedback for 12 V power and relay activation
- Cost effective and modular installation
- Input and output configurability using Rosslare’s AxTraxNG software
- Input Voltage: 12 VDC from host controller
- Input Current (not including devices): Standby: 30 mA; maximum: 135 mA
- Number of Reader Ports: 2
- Number of Inputs: 4
- Output Relays: 4 x 5 A Form-C relays with N.O., N.C. and COM contacts
- Inputs Voltage: 5 VDC maximum voltage
- Input Type: Selectable: normally open, normally closed, supervised with one resistor (three states, normally open or normally closed), supervised with two resistors (four states, normally open or normally closed)
- Reader Output Voltage: 12 VDC
- Maximum Reader Current: 300 mA
- LED Control Output: Open collector, active low
- Tamper Input: 5 VDC maximum voltage
- Supported Formats: Various; see the AxTraxNG software manual
- Power LED: Active when connected to a power source
- Output LEDs: Four LEDs; each output LED is active when an output relay is activated and N.O. to COM contacts are shorted
- Dimensions (L x W x H): 3.9 x 3.0 x 1.3 in (100 x 75.9 x 32.5 mm)
- Weight: 0.2 lb (98.2 g)
- System Components: Compatible with a variety of Rosslare single/double/multi-door controllers, any keypad or biometric reader that supports the Wiegand or Clock-and-Data transmission formats, and many third-party access control units
- Warranty: 2 years, limited
Rosslare networked panels and expansion boards run card and PIN access for buildings with several doors.
- Commercial office buildings
- Multi-family building entry
- Schools and institutional buildings
- Gate and door access control
- Sites managed in AxTraxNG
All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.
LEADTIME
Items with lead times typically ship in 4-7 business days.
FREE SHIPPING POLICY
Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items
Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.
Protec Controls accepts purchase orders please contact us.
NET 30
We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.
GOVERNMENT & GSA
Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com
