EDI LMA-100-HV Loop Detector ***Discontinued - Unavailable***
EDI LMA-100-HV Loop Detector ***Discontinued - Unavailable***
- Current Trade Policy Costs Included In Price
- In Cart Discounts Offered on Many Products
- GSA, Net 30 and purchase orders available
Description
Discontinued by EDI. The LMA-1250-HV is the updated version. The LMA-100-HV is a single channel, single output loop detector with one relay (NO and NC contacts) and an 11-pin connector. It runs on 120 to 240 VAC (95 to 250 VAC, 50/60 Hz).
DIP switches set four sensitivity levels, four loop frequencies, sensitivity boost, Limited or Infinite Presence, and the output mode: presence, or a 250 ms pulse on entry or on exit. A power loss of 4 seconds or less does not drop a call. LED flash patterns show open loops, shorted loops and inductance changes over 25%, and the last fault is kept in memory. It operates from -30°F to 165°F.
Before You Order
- No longer made. The LMA-1250-HV is an 11-pin plug-in detector that adds a second relay and the DEFLECTOMETER display.
- The LMA-100-LV was the 12/24 V AC/DC version.
- Models: LMA-100-LV operates on 12 VDC, 24 VDC and 24 VAC; LMA-100-HV operates on 115 VAC and 240 VAC
- Advanced Loop Diagnostics: Loop Fault Monitor continually checks loop integrity and reports and stores open loops, shorted loops and 25% sudden changes of inductance
- Loop Fault Memory: Non-volatile memory stores and displays current and previous loop faults on the front panel POWER (Loop Fault) LED; a power loss or reset does not delete it
- CALL (DETECT) Output Memory: The detector will not drop a CALL (DETECT) state if power is lost for 4 seconds or less
- Supply: LMA-100-LV: 10 - 40 VDC or 14 - 35 VAC, 75 mA max.; LMA-100-HV: 95 - 250 VAC, 50/60 Hz, 0.5 W max.
- Inductance Range: 20 - 2,500 µH
- Lead-In Length: Up to 5,000 ft
- Relay Contacts: 5 A at 250 VAC or 30 VDC
- Operating Temperature: -30 to 165°F (-34 to 74°C)
- Humidity: 0 to 95% relative
- Dimensions: 2.875 in L x 1.375 in W x 3.0625 in H (7.30 x 3.49 x 7.78 cm)
- Weight: 10 oz
- Connector: Rear mount 11 pin male Molex (Amphenol P/N 86CP11)
- Standard Features: Four sensitivity levels, four frequency levels, automatic tuning, lightning and surge protection, sensitivity boost, fail safe and fail secure configurations, separate color-coded LED indicators, compatible with radio controls and remote openers
- Loop Inductance Range: 20 to 2500 µH
Plug-in loop detection for gate operators and barrier arms, run from the operator's detector port or harness.
- Free exit loops
- Safety and reversing loops
- Shadow loops on swing gates
- Commercial slide and swing gates
- Parking barrier arm lanes
All in stock orders typically ship the same business days or within 1-2 business days. Cut off for same day shipping is 2:30PM Central Time.
LEADTIME
Items with lead times typically ship in 4-7 business days.
FREE SHIPPING POLICY
Orders with free shipping may have longer lead times due to those items being shipped the most economical way. Free shipping on most orders over $195.00 does not include gate operators, loop sealant, and any extreme length or weight items
Our return policy lasts for only 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund. Some items such as Gate Operators or custom parts may not be returnable or carry a restocking fee if returned.
Protec Controls accepts purchase orders please contact us.
NET 30
We also support Net 30 terms on our website for easy ordering. Please fill out the form to the right with your company information and we will get your account setup to place Net 30 orders.
GOVERNMENT & GSA
Protec Controls accepts GSA SmartPay cards along with all major credit cards. For government quotes and purchase orders please email govsales@proteccontrols.com
