• Designed for solar powered applications.
• Designed to be cross talk free between other similar loops detectors.
• Plug and play. Switchless and self-adapting to most common installations. Connect it up and watch it work.
• Small profile, perfect for many installations.
• Automatically compensates for loop and lead-In sizes
• Fail-secure operation.
• Wide low-voltage operation.
• This series of Diablo Controls detectors are covered by United States patent. Patent number US 7,132,959 “Non-Interfering Vehicle Detection.”

LED Indicators: Separate Power and Detect LED’s.  The green Power LED blinks once per second to indicate the detector is operating and powered.  The red Detect LED will turn on when a vehicle is over the loop detection area.

Sensitivity: Automatically compensates for loops lead-in sizes.

Power: This detector is powered with 10 to 30 volts AC or DC.  Approximately 1 mA current.  The relay contacts are rated at 1 amp maximum.

Connector: Removable 7-pin terminal block.

Pin assignments shown below (from left to right).

1: Relay Normally Closed (NC) – contact opens for detect

2: Relay Common

3: Relay Normally Open (NO) – contact closes for detect

4: Power common

5: Power in (10 to 30 Volts AC or +DC)

6: Loop

7: Loop

Size:  Height: 1.52”    Width: 2.9”    Depth: 1.56”

Operating Temperature:  35°F to 165°F (-37°C to 74°C)

DSP-6LP Manual

DSP-6LP Cut Sheet

DSP-6LP Size Chart